Windows users often cause problems, be done no matter if they have extended the service pack installed on your computer or downloaded, updates, etc. This does not mean that Windows is not worth having used it just happens to be running many applications to be simultaneously . You should understand, first of all, what could be causing the problem and then proceed with the instructions to fix it.
The most common reasons for the shutdown problem:
Belkin Wireless N Router
Device Drivers
VirusInfection
Corrupted registry entries
Hardware / Software
Corrupted system files
Defective / damaged hard disk
Firmware corrupted
Recent changes
Instructions:
Restart the computer - A wrong or improper shutdown caused damage to the PC and then prevents the closure. Simplest of all methods, restart the computer, since it is the internal software and settings and retune it solves the problem (s). You can alsounplug the power cord from the power port of your PC and at the same time consider other pieces of hardware connected to your computer. Wait 4-5 minutes and connect it again to see if the problem is solved. This works most of the time.
Run Windows Update - It 'needed for Windows updates, since download and install and run the latest patches, drivers and definitions for the operating system. Updates to automatically fix any internal problems and make your PC runsmoothly.
Change the power settings - Click on "Start"> select "Control Panel"> Click on '"Switch to Classic View." Change "If you do not see Power Options Options at the top left panel, click." 'Now say, the last tab, tab "APM" and put a checkmark in the box "Enable Advanced Power Management support," he says. Click 'OK' to exitWindow to see. If not, check that the configuration of advanced computer and Power Interface (ACPI) standard supported.
To check your computer is ACPI-compliant, you must click on the "Start" menu> click and click on 'Run' button. Type "devmgmt.msc" (without quotes) in the box and click 'OK' button or click 'Enter' on your keyboard. Click under the "Device Manager" window on the '+' to the left'Computer' to see "ACPI" there. If he is not there, your PC is not ACPI compliant and therefore can not set the power settings option.
Device Drivers - Replace defective or damaged disc with a new one. Always download and install the latest driver compatible with the version of Windows you have. Check your provider or publisher of the website for the latest drivers and compatible.
Run Registry Cleaner - Repair damaged / corruptedThe log entries from a registry cleaner. This tool cleans all the errors in the Windows registry and helps to run smoothly and effectively. Also, if you recently removed a program from your PC, but not its registry entries, will be registry errors. Unused registry entries do not clog up a computer and keep it to function properly. Therefore, a program to always remove the registry entries, click on the Windows Registry Editor.
Recent Changes - If yourecent changes to the PC such as installing or removing new software / program or hardware. Check to see if the changes had been made. An incorrectly installed or removed software / hardware can cause Windows not closing problem. Correct the changes accordingly.
Disable the Wake on Settings - If your PC does not turn off and back on a cycle, then this statement is for you. It's because your PC's motherboard has an integrated Ethernet card that sets Wake-On-Call. ControlDevice Manager properties and disable Wake-on setting.
Virus infection - It 's always advisable to keep your virus protection updated, so that regularly install the latest security definitions to improve your PC's defense system. It should also run on regular scans, detects and removes viruses / malware infection immediately when trying to penetrate the defense system of the wall.
Hardware / Software - A properly installed,misconfigured, or faulty / damaged software and / or hardware can cause Windows does not shutdown problem. To review, which programs or hardware caused the problem and correct it.
Update the system firmware - firmware upgrade to get rid of this problem.
Bad Hard Drive - Replace damaged or defective RAM stick. Check your hard disk by typing the command "chkdsk" in the "Run". Enter the command withoutCitations in the box and click 'Submit' on the keyboard. If the unit is good, is no longer any message. If it is a request to the hard drive problems are not resolved, then it is advisable to hard disk problems. Type "chkdsk / f in" "Run box, click on 'Submit'. Press 'Y' and fix errors found 'N' to end the command. If you press 'Y', resolves the problem and save you lost files in the chain as content that can be checked later. IfThis 'N' then do not save what was lost content chain.
Other suggestions:
Be sure to run the latest service pack for Windows XP with all updates downloaded and installed correctly.
You must log on as administrator, or should at least have the same rights to perform some of the above instructions.
What to do when Windows XP will not turn offbelkin wireless n router
